Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set User Manual
Page 63
Basic Control Operation
Chapter 2
2-39
Figure 2.9
Message Log Display Screen
ACTIVE
ERRORS
TIME
STAMPS
MESSAGE LOG
PAGE 1 of 9
SYSTEM MESSAGE
(The logged system error messages are displayed in
this area)
MACHINE MESSAGE
(The logged logic messages are displayed in this area)
This is the information displayed on the MESSAGE LOG screen. The
control displays up to 99 system messages and up to 99 machine messages.
These are the most recent system messages and machine messages that
occurred on the control since memory was last cleared. To display more
messages, press the
[
•
]
key while holding the
[SHIFT]
key. The next page
of the logged messages displays.
Press the
{TIME STAMPS}
softkey to view the date and time of when
each logged system message and machine message occurred.
Pressing this softkey may cause part of the messages text to be
overlaid by the date and time data. To display the full messages text ,
press the
{FULL MESAGE}
softkey.
4.
Press the
{ACTIVE ERRORS}
softkey to return to the
MESSAGE ACTIVE screen.
(softkey level 2)
ACTIVE
ERRORS
TIME
STAMPS
5.
To return to softkey level 1 press the exit {
•
} softkey while holding
the
[SHIFT]
key.