Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set User Manual
Page 346
![background image](/manuals/580057/346/background.png)
Chapter 12
Overtravels and Programmable Zones
12-8
Figure 12.6
Area Defining Programmable Zone 3
Inside or outside border of
Programmable Zone 3
as defined by minimum
and maximum axis values
Z
Y
X
Max X
value
Min X
value
Machine
coordinate
zero
Max Y
value
Min Y
value
Max Z
value
Min Z
value
Unlike the software overtravels, which define the perimeter of an area
from which the cutting tool may not exit, programmable zone 3 can define
either an area that the cutting tool may not exit or an area that the cutting
tool may not enter. This is determined by the current tool location when
programmable zone 3 is made active.
It defines an area that the cutting tool may not exit if the tool is currently
inside the zone when the zone is activated.
It defines an area that the cutting tool may not enter if the tool is
currently outside the zone when the zone is activated.