1 led indicators – Comtech EF Data CDM-625A User Manual

Page 128

Advertising
background image

CDM-625A Advanced Satellite Modem

MN-CDM625A

Front Panel Operation

Revision 3

6–2

6.1.1 LED Indicators

In general, the Alarm relay state reflects the state of

the Front Panel LEDs. For example, if the Unit Status

LED is red, the Unit Alarm relay is active, etc. The sole

exception is the Transmit Traffic relay – it does not

reflect the state of the Tx carrier; it activates only if a

Transmit Traffic Fault exists.

The front panel LED indicators function as follows:

LED

State

Function

Tx (Transmit)

TRAFFIC

Green

No Tx Traffic faults

Off

A Tx Traffic fault exists (this is independent of the Transmit Carrier state – see TX

Carrier LED)

Tx (Transmit)

Carrier

Green

Tx Carrier is ON (reflects the true state of the Tx carrier, regardless of Tx Traffic

state)

Off

Tx Carrier is OFF

Rx (Receive)

TRAFFIC

Green

No Rx Traffic faults (Demod/FEC decoder are locked, valid frame sync, if applicable,

and no other Rx traffic alarms)

Off

An Rx Traffic fault exists (frame sync alarm, etc - the demod may still be OK – see

Demod Lock LED)

DEMOD

LOCK

Green

The demodulator and FEC decoder are locked

Off

The demodulator and/or FEC decoder are not locked

CnC ACTIVE

Green

CnC Mode is active

Off

CnC Mode is not active

CnC LOCK

Green

CnC Mode is active and the CnC algorithm has converged and locked

Off

If CnC Mode is active, the CnC algorithm has not converged and locked

TIMED

FEATURE

Green

Demo Mode is active or Time Limited CnC is active with > 15 days left before

expiration or Fractional CnC is active, but unit is offline

Red

Time Limited CnC or Fractional CnC allowed time has expired

Orange Fractional CnC is active, unit is online with < 15 days left before expiration

Off

No time limited feature enabled. (will also turn off after Demo Mode time has expired)

DISTANT

END

Green

CnC-APC or IP-ACM or V2-ACM or EDMAC mode is active, and distant-end demod

is locked

Orange CnC-APC or IP-ACM or V2-ACM or EDMAC mode is active, and distant-end demod

is not locked

Off

CnC-APC or IP-ACM or V2-ACM or EDMAC is active, and local demod is unlocked

Advertising