Comtech EF Data CDM-625A - Manual (Page 522)

CDM-625A Advanced Satellite Modem MN-CDM625A
CDM-625A ODU (Transceiver, BUC, LNB) Operation Revision 3
10–54
10.5.1 ODU Operations using the Telnet CLI
1) ODU Comms must be Enabled, and the CDM-625A must be configured for
70/140 MHz operation in order to fully use the Telnet CLI ODU menus.
2) The Comtech EF Data KST-2000A/B Transceiver and LPOD Amplifier / Block Up
Converter are not supported by the Telnet CLI at this time.
10.5.1.1 Home (Main) Menu
The Home Menu serves as the CLI’s primary navigation page. Press the ‘E’ hot key to access the
ODU submenus.
Hot Key Description Function
A Administration Access administrative configuration submenu
B Modem Access modem configuration submenu
C Network Access network configuration submenu
D WAN Access WAN configuration submenu
E Outdoor Unit (ODU) Access ODU comms, CSAT-5060 configuration submenus
F Redundancy Access 1:1 or 1:N redundancy configuration submenu
G General Information
Enter alphanumeric Circuit ID; view read-only CDM-625A operations
information screens
H Logs
Access Base Modem and Packet Processor stored events and statistics logs,
alarms control submenus
I Statistics Access CDM-625A operational statistics submenus
J Contact View read-only Customer Support contact information screen
K Remote Mode Open the Remote Access Mode setting