Comtech EF Data CDM-625A - Manual (Page 421)

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 3
9–43
9.3.4.2 Home > Network > LAN IP
Open the LAN IP page from the Network submenu. This page contains the following options:
Hot
Key Dialog Window
Option Entry
A 2048-byte Ethernet Frames Use the ↑↓ arrow keys to select Disabled or Enabled
B Default Gateway
Typical for either entry – Enter an IP address in the form
XXX.XXX.XXX.XXX
C IP Address
D IP Network Prefix Enter a value from 8 to 30
E Switch MAC Learning Use the ↑↓ arrow keys to select Off or On
F L2 QoS
Use the ↑↓ arrow keys to select Off, VLAN Prio Only, Port Prio
Only, or VLAN and Port Prio
G L3 QoS
Use the ↑↓ arrow keys to select Off, Advanced QoS Max
Priority, Advanced QoS Min Max, or Advanced QoS DiffServ
H Working Mode
Use the ↑↓ arrow keys to select Managed Switch, Router
Point-to-Point, Router Multipoint Hub, or Router Multipoint
Remote
I Packet Processor Enable Use the ↑↓ arrow keys to select Disabled or Enabled
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Network
submenu.