Comtech EF Data CDM-625A - Manual (Page 373)

CDM-625A Advanced Satellite Modem MN-CDM625A
Serial-based Remote Product Management Revision 3
8–61
8.5.10 Ethernet Parameters
Parameter
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Ethernet Control SEC= 31 bytes Command or Query.
Sets or returns Ethernet control in the form 1abbbbc;2abbbbc;3abbbbc;4abbbbc, where:
1, 2, 3, 4 is port number.
a=Reserved, default to 1.
bbbb=Reserved, default to 0001.
c=port speed:
0=Auto
1=100 Full
2=100 Half
3=10 Full
4=10 Half
SEC=
SEC?
SEC*
SEC#
SEC? SEC=1abbbbc;2abbb
bc;3abbbbc;4abbbbc
(see Description of
Arguments)
Actual
Negotiated Port
Speed
N/A None Query only.
Returns the actual negotiated port sepped in the form abcd, where:
a=port 1 negotiated port speed.
b=port 2 negotiated port speed.
c=port 3 negotiated port speed.
d=port 4 negotiated port speed.
a, b, c, d have the following values:
0=Link down
1=100 Full
2=100 Half
3=10 Full
4=10 Half
N/A NPS? NPS=abcd
(see Description of
Arguments)
Ethernet Global
Configuration
EGC= Up to 347
bytes
Command or Query.
Sets or returns Global Configuration of CDM-625A Ethernet, in the form shown in the Response to Query column, where:
EGC=
EGC?
EGC*
EGC#
EGC?
EGC?n (where
n=0 thru 9.
Returns the EGC
portion of 1 of 10
stored
configurations)
EGC=1abccccdxxx;2ab
ccccdxxx;3abccccdxxx;
4abccccdxxxDEFFGHI
JKKKKLLLL….
1abccccdxxx;2abccccdxxx;3abccccdxxx;4abccccdxxx=Switch Ports configuration
D=VLAN Mode Enable
E=Switch MAC Learning
FF=QoS Priority
G=Ethernet 2048 Frame Size
H=Precision Time Protocol Feature
I=Precision Time Protocol Mode
J=Carrier ID
KKKK=Management VLAN ID
LLLL….=VLAN Table
same as SPC
same as SVM
same as SML
same as QOS
same as EFS
same as PTP
same as PTM
same as CAI
same as SMV
same as SVT
WAN Buffer
Length
WBL= 3 bytes Command or Query.
Sets or returns WAN Buffer Length in the form xxx, where:
xxx=Value, in 20 millisecond steps, from 020 thru 780.
Example: <0/WBL=100
WBL=
WBL?
WBL*
WBL#
WBL? WBL=xxx
(see Description of
Arguments)