Comtech EF Data CDM-625A - Manual (Page 672)

CDM-625A Advanced Satellite Modem MN-CDM625A
Appendix L Revision 3
L–6
L.3.2.2 Telnet Interface
• Sect. 7.4 Telnet Interface (Chapter 7. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
• Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
• Chapter 9. TELNET COMMAND LINE INTERFACE (CLI) OPERATION
Comtech EF Data provides a Telnet interface for the purpose of equipment monitor and control
(M&C) using either the standard remote control protocol or, when the optional IP Packet
Processor is installed and enabled Figure L-1 , the Telnet Command Line Interface (CLI) ( ).
Figure L-1. CDM-625A Telnet Interfaces Interfaces (Serial Remote / CLI)
L.3.2.3 HTTP (Web Server) Interface
Sect. 7.5 HTTP (Web Server) Interface (Chapter 7. ETHERNET-BASED REMOTE
PRODUCT MANAGEMENT)
The embedded HTTP (Web Server) application (Figure L-2) provides an easy to use interface
designed for optimal performance when using Microsoft’s Internet Explorer Version 9.0 or
higher. The interface features enhanced functionality when the CDM-625A is equipped with the
IP Packet Processor.
Figure L-2. CDM-625A HTTP (Web Server) Interface Home Page