Comtech EF Data CDM-625A - Manual (Page 271)

CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 3
7–41
QoS Rules Table
For the ‘Max/Priority’ page:
For the ‘Min/Max’ page:
This section displays all existing QoS Rules Table entries. From left to right:
Column Description
Index This is the internal table index that is automatically assigned and cannot be edited.
Protocol Specifies the protocol for the specific rule.
VLAN Range Specifies the minimum-to-maximum range of VLAN IDs (applicable only in Managed Switch
Mode)
TOS Specifies the Type Of Service
Src IP/Mask Identifies the Source IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Dst IP/Mask Identifies the Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Min Src Port Specifies the Minimum Source Port.
Max Src Port Specifies the Maximum Source Port.
Min Dst Port Specifies the Minimum Destination Port.
Max Dst Port Specifies the Maximum Destination Port.
Max BW (Kbps) (“Max/Priority” page only) Specifies the maximum bandwidth value.
Min BW (Kbps) (“Min/Max” page only) Specifies the minimum bandwidth value.
Priority (“Max/Priority” page only) Specifies the priority established for the specific rule.
WRED Specifies the WRED (Weighted Random Early Detection) setting for the specific rule as
Disable or Enable.
Filter All Specifies the flow filter setting for the specific rule as Disable or Enable.
Add New QoS Rule
This section allows you to directly add a new rule entry. Note that the index will automatically
increment to the next available number.
For the “Max/Priority” page: