Comtech EF Data CDM-625A - Manual (Page 499)

CDM-625A Advanced Satellite Modem MN-CDM625A
CDM-625A ODU (Transceiver, BUC, LNB) Operation Revision 3
10–31
ODU: FSK-control  BUC  Advanced-FSK  LPOD (2LPODs
Online/Offline LPOD) Statistics Config
Stats: Logging=Enabled Interval=10 min
Averaging=Disabled Clear-All=No (◄ ►)
Use the ▲▼ arrow keys to select Logging, Interval, Averaging, or Clear-All, and then use the
▲▼ arrow keys to set that setting:
Selection Setting
Logging Enabled or Disabled.
Interval The Logging Interval is the period of time over which performance statistics are
measured. Set this interval as 00 to disable the feature (i.e., no logging) or,
otherwise, define the logging interval from 10 through 90 minutes in 10-minute
increments.
Averaging Enabled or Disabled.
Clear-All When prompted, select YES.
Press ENTER when done.
ODU: FSK-control  BUC  Advanced-FSK  LPOD (2LPODs
Online/Offline LPOD)  Statistics  Stored-Statistics
To enable statistics logging, see the LPOD  Statistics: Config menu. As statistics are compiled,
the Stored-Statistics screen appears as shown here:
Reading Stored Stats..... Please Wait
Once the statistics are compiled, the Stored-Statistics screen displays this data as shown here:
Stats001: 000.0C 040.0C 20.45dBm 10.00dB
10/01/10 12:52:08 On On Off 001.0 002.3V
Use the ▲▼ arrow keys to scroll backwards or forwards through the statistics log entries.
The top line displays:
• The statistics log entry number (up to 512 entries may be stored)
• Operating Temperature
• Amplifier Temperature
• Power