Comtech EF Data CDM-625A - Manual (Page 180)

CDM-625A Advanced Satellite Modem MN-CDM625A
Front Panel Operation Revision 3
6–54
6.2.1.12 CONFIG: Remote (Remote Control)
Remote Control=Local
(Local,Serial remote,Ethernet) ()
Use the ▲▼ arrow keys to select Local, Serial remote, or Ethernet. Press ENTER.
When you select Local, you are not permitted to reconfigure the modem via Serial Remote or
Ethernet, although remote monitoring is permissible. When you select Local or Serial Remote,
the modem displays a common submenu – proceed to the next section for details.
6.2.1.12.1 CONFIG: Remote  Local or Serial remote settings
Interface= RS-485-4W (232,485-2,485-4)
Address= 0001 9600 baud ()
When you select either Local or Serial remote control, use the ◄ ► arrow keys to select
Interface, Address, or Baudrate. Then, use the ▲▼ arrow keys to edit the Interface type,
Baudrate, and each digit of the Address.
Note that:
• Character format is not selectable and is fixed at 8-N-1.
• For RS-485 (aka EIA-485) – The permitted address range is from 0001 to 9999. Address 0000
is reserved for universal addressing.
• For RS-232 (aka EIA-232) – The Address is fixed at 0000.