4 home > modem > carrier-in-carrier (cnc) – Comtech EF Data CDM-625A User Manual
Page 406
CDM-625A Advanced Satellite Modem
MN-CDM625A
Telnet Command Line Interface (CLI) Operation
Revision 3
9–28
9.3.3.4 Home > Modem > Carrier-in-Carrier (CnC)
Appendix F. D
OUBLE
T
ALK
C
ARRIER
-
IN
-C
ARRIER
(C
N
C)
OPTION
Open the Carrier-in-Carrier (CnC) page from the Modem submenu. This page contains the
following options:
Hot
Key Dialog Window
Option Entry
A
CnC Mode
Use the ↑↓ arrow keys to select:
•
Off
•
On Normal
•
APC CBand Side A
•
APC XBand Side A
•
APC KuBand Side A
•
APC KaBand Side A
•
APC CBand Side B
•
APC XBand Side B
•
APC KuBand Side B
•
APC KaBand Side B
B
CnC Search Min Delay
Enter a minimum value from 0 to 330 ms
C
CnC Search Max Delay Enter a maximum value from 0 to 330 ms
D
CnC Frequency Offset
Enter a value from 1 to 200 KHz
E
CnC PMSI Mode
Use the ↑↓ arrow keys to select Idle, Redundancy, Talk, or Listen
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem
submenu.