Comtech EF Data CDM-625A - Manual (Page 295)

CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 3
7–65
7.5.4.4.2.2 Status | Modem Logs | Packet Processor
This nested page is accessible only to Admin users and when you install and enable
7.5.3.1 the optional IP Packet Processor card. See Sect. for complete details about
using conditional access pages.
This page provides you with a scrollable window showing the optional IP Packet Processor’s
cumulative events, plus control over what information is displayed for IP Packet Processor
operations.
Figure 7-35. Status | Modem Logs | Packet Processor page
Event Logging
• Logging On/Off – Select event logging as On or Off.
• Logging Level – Use the drop-down list to select the type of information displayed in the log:
Errors Only, Errors and Warnings, or All Information.
Click [Submit] once the desired settings have been entered in this section.
Clear Event Log
Scroll through the Event Log as needed, and then click [Clear Log] to wipe the log clean. The
table resets to a single event description – “Event log cleared.”
Event Logging Table
The Event Login Table displays a maximum of 256 events. Each event is assigned a sequential
Index number; its type, the date and time of occurrence, and a description of the event follows.
Click [Clear Log] to wipe the log clean.