L.2.5 fast options, L.2.5.1 advanced quality of service (qos) – Comtech EF Data CDM-625A User Manual

Page 669

Advertising
background image

CDM-625A Advanced Satellite Modem

MN-CDM625A

Appendix L

Revision 3

L–3

Sub-Mux capability can be used with the IP Packet Processor to multiplex a primary serial

synchronous or G.703 traffic stream with IP.

L.2.5 FAST Options

• Chapter 5. FAST ACTIVATION PROCEDURE

• Sect. 6.2.8 SELECT: FAST Menus (Chapter 6. FRONT PANEL OPERATION)

If there is a need to upgrade the CDM-625A IP Packet Processor’s functionality, Comtech EF Data

provides Fully Accessible System Topology (FAST), a technology that permits the purchase and

installation of options through special authorization codes. These unique Fast Access Codes may

be purchased from Comtech EF Data during normal business hours, and then loaded into the

unit using the front panel keypad.

Contact Comtech EF Data Product Support to acquire the following available FAST options:

• Quality of Service (QoS)

• AES Encryption

• Header Compression:

o Up to 5 Mbps (CCM) / 1200 ksps (ACM)

o Up to 10 Mbps (CCM) / 4100 ksps (ACM)

o Up to 15 Mbps (CCM) / 4100 ksps (ACM)

o Up to 20 Mbps (CCM) / 4100 ksps (ACM)

o Up to 25 Mbps (CCM) / 4100 ksps (ACM)

• Payload Compression:

o Up to 5 Mbps (CCM) / 1200 ksps (ACM)

o Up to 10 Mbps (CCM) / 4100 ksps (ACM)

o Up to 15 Mbps (CCM) / 4100 ksps (ACM)

o Up to 20 Mbps (CCM) / 4100 ksps (ACM)

o Up to 25 Mbps (CCM) / 4100 ksps (ACM)

L.2.5.1 Advanced Quality of Service (QoS)

The IP Packet Processor incorporates multi-level QoS to ensure the highest quality of service

with minimal jitter and latency for real-time traffic, priority treatment of mission critical

applications and maximum bandwidth efficiency.

The supported modes of QoS are:

• DiffServ – Industry-standard method of providing QoS, enabling seamless co-existence in

networks that implement DiffServ

• Max/Priority – Provides multi-level traffic prioritization with the ability to limit maximum

traffic per priority class

• Min/Max – Provides a Committed Information Rate (CIR) to each user-defined class of

traffic with the ability to allow a higher burstable rate depending on availability

Advertising