T.4.3 radius m&c using telnet – Comtech EF Data CDM-625A User Manual
Page 748
CDM-625A Advanced Satellite Modem
MN-CDM625A
Appendix T
Revision 3
T–8
T.4.3
RADIUS M&C Using Telnet
•
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
•
Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
The RADIUS commands/queries are available only if you log in to the Telnet Remote
Control Interface (not to be confused with the Telnet CLI – Command Line Interface)
using the Administrator Name and Password.
Command/Query Function
RAE
Enables/Disables RADIUS operation
RAA
Assigns the Primary RADIUS Client Server IP Address
RAB
Assigns the Secondary RADIUS Client Server IP Address
RAP
Assigns the RADIUS Server Port Address
RAT
Defines the RADIUS Client Server password authentication protocol
RAS
Assigns the RADIUS Client Server shared secret