Comtech EF Data CDM-625A - Manual (Page 676)

CDM-625A Advanced Satellite Modem MN-CDM625A
Appendix L Revision 3
L–10
Step Task
2 The illustration at right identifies the upgrade locations
within the chassis for:
• Installation of the fan into the chassis (A);
• Plug-in of both the fan power cable (B) and IP Packet
Processor Card (C) into the modem’s framing board;
• Assembly of the IP Packet Processor Card onto the
chassis-mounted card bosses (D).
3 Unplug the front panel ribbon cable from its connector on
the modem’s framing board, and then move the cable out of
the way of the upgrade location (CDM-625 chassis shown).