Comtech EF Data CDM-625A - Manual (Page 248)

CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 3
7–18
7.5.4.2.3 Admin | Firmware Pages
Chapter 4. UPDATING FIRMWARE
Click the Base Modem tab or, when the optional IP Packet Processor card is installed
7.5.4.2.3.1 Admin | Firmware | Base Modem
, the
Packet Processor tab to continue.
Use this page to view the scrollable, read-only status windows that provide information about
the basic unit’s two loaded and operational firmware images.
Figure 7-6. Admin | Firmware | Base Modem page
Boot
This window identifies the firmware number, version, and release date that is loaded upon
power-up/boot up of the unit.
Image 1 / Image 2
These scrollable windows identify the Firmware numbers, versions, and release dates that
comprise the aggregate image load.
Currently Running (read-only)
The current running image is identified here.