Comtech EF Data CDM-625A - Manual (Page 352)

CDM-625A Advanced Satellite Modem MN-CDM625A
Serial-based Remote Product Management Revision 3
8–40
Parameter
Command
(Instruction
& Qualifier)
Length of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Carrier ID
Longitude
LNG= 9 bytes Command or Query.
Sets or returns the Carrier ID Longitude, in the form dddaaamm.mmbbbD, where:
ddd=degrees Longitude,
aaa=fixed value “deg”.
mm.mm=decimal minutes of the Longitude.
bbb=fixed value “min”.
D=direction (E (East) or W (West)).
Example: <0/LNG=111deg59.99minE (Longitude is 111º59.99΄E)
LNG=
LNG?
LNG? LNG=dddaaamm.mm
bbbD
{see Description of
Arguments
Carrier ID
Telephone
Number
PHN= Up to 18 bytes Command or Query.
Sets or returns the Carrier ID Telephone Number (maximum length is 18 characters).
Example: <0/PHN=18664723963
PHN=
PHN?
PHN? PHN=x
{see Description of
Arguments
Carrier ID
Custom
Message
MSG= Up to 24 bytes Command or Query.
Sets or returns the Carrier ID Custom Message (maximum length is 24 characters).
Valid characters include printable ASCII characters from space(0x20) through ~(0x7E)
Example: <0/MSG=Comtech EF Data
MSG=
MSG?
MSG? MSG=x
{see Description of
Arguments
Radius
Client
RAE= 1 byte, 0 or 1 Command or Query.
Sets or returns the RADIUS Client in the form x, where:
0=Disabled
1=Enabled
Example: <0/RAE=0
Note: Parameter available only through Telnet CLI. Command available at Administrator level only.
RAE=
RAE?
RAE*
RAE#
RAE? RAE=x
(see Description of
Arguments)
Primary Radius
Server IPv4
Address
RAA= 15 bytes Command or Query.
Sets or returns the Primary Radius Server IP Address in the form aaa.bbb.ccc.ddd, where:
aaa=000-223
bbb=000-255
ccc=000-255
ddd=001-255
Example: <0/RAA=192.168.001.011
Note: Parameter available only through Telnet CLI. Command available at Administrator level only.
RAA=
RAA?
RAA*
RAA#
RAA? RAA=aaa.bbb.ccc.ddd
(see Description of
Arguments)
Secondary
Radius Server
IPv4 Address
RAB= 15 bytes Command or Query.
Sets or returns the Secondary Radius Server IP Address in the form aaa.bbb.ccc.ddd, where:
aaa=000-223
bbb=000-255
ccc=000-255
ddd=001-255
Example: <0/RAB=192.168.001.011
Note: Parameter available only through Telnet CLI. Command available at Administrator level only.
RAB=
RAB?
RAB*
RAB#
RAB? RAB=aaa.bbb.ccc.ddd
(see Description of
Arguments)
Radius
Server Port
RAP= 5 bytes Command or Query.
Sets or returns the RADIUS Server Port in the form xxxxx
Example: <0/RAP=01812
RAP=
RAP?
RAP*
RAP#
RAP? RAP=xxxxx
(see Description of
Arguments)