Comtech EF Data CDM-625A - Manual (Page 231)

7–1
Chapter 7. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
7.1 Overview
The CDM-625A Advanced Satellite Modem base unit is equipped with four RJ-45 10/100 BaseT
Ethernet connectors, subject to the following conditions:
When Dedicated Management is disabled, you may use any port for Ethernet-based remote
product management (monitor and control) purposes.
When Dedicated Management is enabled, you may use only that specific port
7.2 Ethernet Management Interface Protocols
for remote
monitor and control (M&C) purposes.
The user PC facilitates access to Ethernet-based remote M&C of the CDM-625A through three
separately operated protocols:
Simple Network Management Protocol (SNMP) – This requires a user-supplied Network
Management System (NMS) and a user-supplied Management Information Base (MIB) File
Browser.
Telnet Interface – This requires use of a user-supplied terminal emulation program such as
HyperTerminal (for use with the remote control protocol) or PuTTY (for use with the Telnet
Command Line Interface), installed on the user PC.
CDM-625A HTTP (Web Server) Interface – This requires a compatible user-supplied web
browser such as Internet Explorer, installed on the user PC.