Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 160)

The VS-626M5 PC NC Maintenance Manual
4-139
(3) Operation Status Display Mode
To check data in operation status display mode, do as follows.
The following shows the example where U1-09 (sequence input
signal status) is to be changed.
Note: For explanations of operation status display, refer to APPENDIX 5.
Description
Key
Sequence
Digital Operator
Display
Remarks
U1-01 is displayed.
—
—
Move blinking cursor
to the data number. Depress the [>] key once more to
return the blinking cursor.
Select U1-09. —
Display U1-09 data
contents. The display example is the status
when [RDY] and [EMG] signals
are closed.
Return to operation
status number display —
RESET
DATA
ENTER
DSPL