Yaskawa YASNAC PC NC Maintenance Manual User Manual
Page 296
Chapter 8: Fixed File Operations
PC NC Maintenance Manual
8-94
File ‘plc.properties’
The plc.properties file has one entry, which is used to specify the location
and name of the label file for the Utilities: PLC Parameters screen. The
entry appears as:
label_file = %MMIDATABASE%\\plc_param.txt
where
MMIDATABASE
can be an environment variable defined in the applica-
tion.properties file. Note that ‘\\’, not ‘\’, is required between subdirectory
names.
File ‘programsOpened.properties’
The ‘programsOpened.properties’ file defines which directories are avail-
able from drop-down menus in dialogs popped from the Program: List
screen. A simple ‘programsOpened.properties’ file may appear as:
# number of menu items
menuItemCount = 3
# menu item prefix
menuItemPrefix = item
item1 = %MMIGCODE%\\
item2 = %MMIMACRO%\\
item3 = A:\\
item1.image = file/disk.gif
item2.image = file/disk.gif
item3.image = file/floppy.gif