Yaskawa YASNAC PC NC Maintenance Manual User Manual
Page 266
Chapter 8: Fixed File Operations
PC NC Maintenance Manual
8-64
Power Management Setup Screen
From the Main Setup screen, use the cursor keys to select the POWER
MANAGEMENT SETUP option and press the Enter key.
•
Press the F7 key (Load Turbo defaults option).
•
The BIOS displays the following message:
•
Press the Y key to allow the loading of the turbo defaults.
•
Using the cursor and Page Up/Page Down keys, select and mod-
ify the following options as shown:
* Power Management option from “User Define” to “Disabled”.
* PM Control by APM option from “Yes” to “No”
* Video Off After option from “Standby” to “N/A”
* VGA Active Monitor option from “Enabled” to “Disabled”
* Power Button Override option from “Enabled” to “Disabled”
* IRQ[3-7,9-15],NMI option from “Enabled” to “Disabled”
•
Ensure all the options are set as desired.
•
Press the Esc key to return to the Main Setup screen.