Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 267)

PC NC Maintenance Manual Chapter 8: Fixed File Operations
8-65
PNP/PCI Configuration Screen
From the Main Setup screen, use the cursor keys to select the “PNP/PCI
CONFIGURATION” option and press the Enter key.
• Press the F7 key (Load Turbo defaults option).
• The BIOS displays the following message:
• Press the Y key to allow the loading of the turbo defaults.
• Using the cursor keys, select the “IRQ-9 assigned to” option.
• Change this option from ‘PCI/ISA PnP’ to ‘Legacy ISA’ using the
Page Up or Page Down keys.
• Ensure all the desired options are set.
• Press the Esc key to return to the Main Setup screen.