Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 272)

Chapter 8: Fixed File Operations PC NC Maintenance Manual
8-70
information is present, both details and labels are blank. For example, the
entry in the label file for the fourth bit in that row appears as below.
• #30043
As a final example, the label file entries for byte 3002 appear below.
• #30020 JV1 ; Manual Jog Feedrate Selection
• #30021 JV2 ; Manual Jog Feedrate Selection
• #30022 JV4 ; Manual Jog Feedrate Selection
• #30023 JV8 ; Manual Jog Feedrate Selection
• #30024 JV16 ; Manual Jog Feedrate Selection
• #30025 MP1 ; Manual Pulse Multiplication Ratio
• #30026 MP2 ; Manual Pulse Multiplication Ratio
• #30027 MP4 ; Manual Pulse Multiplication Ratio
The labels for the addresses in the following ranges are PC NC specific.
These labels must remain in the labels file, and they may not be edited:
• #3000~#3159
• #3500~#3749
The addresses in the following ranges are for MTB signals; an MTB can
customize their labels.
• PLC Input from Machine #1000~#1077
• PLC Output to Machine #1100~#1175
• Internal Relay #1200~#1299
• Internal Relay #1400~#1699
• Internal Relay #1800~#2999
• Timer #1700~#1799
• Timer #1300~#1399
• Keep Relay #7100~#7999
• Keep Memory #8000~#9999