Yaskawa YASNAC PC NC Maintenance Manual User Manual
Page 264
Chapter 8: Fixed File Operations
PC NC Maintenance Manual
8-62
Standard CMOS Setup Screen
This screen is used to set-up the system time and date, as well as the hard
disk and floppy disk drive type. To move between the available options,
use the cursor keys to select the desired item. To modify each option, use
the Page Up and Page Down keys to scroll through all the available selec-
tions. These and other functions are shown in the area at the bottom of the
screen.
•
Start by setting the correct date in mm:dd:yy format (month, day,
year). The day of the week is automatically set depending on the
date.
•
Set the correct time in hh:mm:ss format (hour, minute, second).
•
Set the Primary Master hard disk type and mode to ‘AUTO’, as
shown.
•
Set the rest of the hard disk types to ‘None’. Mode is automati-
cally set to ‘------’.
•
Set the Drive A floppy disk drive to 1.44M, 3.5 in.
•
Set the Drive B floppy disk drive to None.
•
Set video type to EGA/VGA.
•
Set Halt On to:
* ‘All Errors’ for systems in which a keyboard is permanently
attached to the CPU rack, so BIOS can detect the keyboard at
boot-up (standard setup).
* ‘All But Keyboard’ for systems without a keyboard, so BIOS
boot-up does not stop and report an error if a keyboard is not
attached to the CPU rack (optional setup).
•
Press the Esc key to return to the Main Setup screen .
BIOS Features Setup Screen
From the Main Setup screen, use the cursor keys to select the BIOS fea-
tures setup option and press the Enter key.
•
Press the F7 key (Load Turbo defaults option).
•
The BIOS displays the following message:
•
Press the Y key to allow the loading of the turbo defaults.
•
Using the cursor keys, select the Boot Sequence option.
•
Change this option from “A,C,SCSI” to “C,A,SCSI” using the
Page Up or Page Down keys.