Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 275)

PC NC Maintenance Manual Chapter 8: Fixed File Operations
8-73
Using Flash Path
1. Call Yaskawa customer service to obtain the Yaskawa FTP site
address, user name, and password.
2. Access the Yaskawa PC NC FTP site and download the PC NC
CNC software update.
3. Copy the file to the FlashPath. (A FlashPath driver is needed.)
4. Go to the Common Part section below.
Common Part
1. Power OFF the PC NC.
2. Change the JFC10 CNC card DIP switch on the JCP20 side SW1
bit 1 to on.
3. Power ON the PC NC.
4. The PC NC boots up and displays a Windows error message.
OFF
ON
Flash memory write
enable switch
1 2 3 4
ON
<
---
Front
view
Side
view
Disable
Enable