Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 162)

The VS-626M5 PC NC Maintenance Manual
4-141
* When data outside the input range are set, “End” does not appear on the display and all data lines
continue blinking even when the [DATA/ENTER] is held down. To correct this condition, depress
the DSPL key to return to the data number display and correct the settings. Refer to APPENDIX 6
for contents of control constants.
The following constants cannot be changed during operation:
C1-25 _` 59, C2-09 _` 27, C3-09 _` 25. They must be changed when
stopped.
The following constants can be changed during operation or when stopped:
C1-01 _` 24, C2-01 _` 08, C3-01 _` 08.