Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 273)

PC NC Maintenance Manual Chapter 8: Fixed File Operations
8-71
PLC Parameters Screen
The labelling scheme for the Utilities: PLC Parameters screen is similar to
that for the Utilities: PLC Diagnosis screen. Labels for the Utilities: PLC
Parameters screen are stored in the text file ‘c:\ypcnc\data-
base\plc_param.txt’.
The file has an entry for each labelled bit, and the entry contains address,
label, and detail.
Below is an example of a typical label file.
; This file is for PLC parameter label table for PLC parameter
screen.
; Specify the PLC parameter number by pound code and 5 digit
address.
; Specify the address name up to 7 characters.
; ; is for comment.
; Example
#70000 ATC 8 ; ATC 8 pot
#70001 ATC16 ; ATC16 pot
#70002 APC op ; APC option
#70003 Robot ; Robot option