Yaskawa YASNAC PC NC Maintenance Manual User Manual
Page 268
Chapter 8: Fixed File Operations
PC NC Maintenance Manual
8-66
Integrated Peripherals Setup Screen
From the Main Setup screen, use the cursor keys to select the INTE-
GRATED PERIPHERALS option and press the Enter key.
•
Press the F7 key (Load Turbo defaults option).
•
The BIOS displays the following message:
•
Press the Y key to allow the loading of the turbo defaults.
•
Using the cursor keys, select the USB IRQ Released option.
•
Change this option from ‘No’ to ‘Yes’ using the
Page Up or Page
Down keys.
•
Using the cursor keys, select the ‘Parallel Port Mode’ option.
•
Change this option from ‘SPP’ to ‘ECP+EPP’ using the
Page Up
or Page Down keys. The line “ECP Mode Use DMA : 3”
appears in the upper right-hand corner of the screen.
•
Ensure all the options are set as desired.
•
Press the Esc key to return to the Main Setup screen.