Yaskawa YASNAC PC NC Maintenance Manual User Manual
Page 238
Advertising
Chapter 8: Fixed File Operations
PC NC Maintenance Manual
8-36
•
Select “BIOS FEATURES SETUP”. Press the Enter key.
•
Select “Boot Sequence” item. The default setting is “C,A,SCSI”.
Change this setting to “A,C,SCSI” using the “Page Up” or “Page
Down” keys.
•
Press the Esc key to return to the Main Setup screen.
•
Select SAVE & EXIT SETUP and press the Enter key.
•
Press the Y key to save the BIOS setup changes and exit the BIOS
setup utility.
•
The system automatically reboots from the floppy disk.
9.
The PowerQuest Drive Image window appears.
Advertising