Yaskawa Sigma Mini - Manual (Page 242)

EMC DIRECTIVE MEASURES
6.2.4 Motor Cables
— 6-4 —
6.2 Measures to Satisfy the EMC Directive
This section describes the measures required for Servopacks to conform to EMC Directive
(EN55011, EN50082-2).
6.2.1 Applicable Servomotors
Use a Yaskawa Servomotor conforming to EN standards.
• Servomotor Models: SGMM-A1S312 (10 W)
SGMM-A2S312 (20 W)
Refer to 4.4.2 Servomotor Dimensional Drawings: European Safety Standards for de-
tails on the above Servomotors.
The difference with standard Servomotors is in the encoder connector only.
6.2.2 Applicable Noise Filter
Model MYB-1206-33
Manufacturer NEMIC-LAMBDA K.K
Make sure to ground the noise filter properly.
6.2.3 Applicable Power Supply
Use a power supply conforming to EN standards.
Make sure to ground the power supply properly.
Recommended power supply is as follows:
Model PLEY24HSZ-PU
Manufacturer ETA ELECTRIC IND. Co., Ltd
6.2.4 Motor Cables
The maximum cable length is 5 m (16.7 feet).
6