Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors - Manual (Page 122)

4 Operation
4.3.3 Digital Operator Display during Testing without Motor
4-32
4.3.3 Digital Operator Display during Testing without Motor
The mark ( ∗) is displayed before status display to indicate the test without motor operation is in progress.
(Example: Test without motor in progress)
Note: The test without motor status is not displayed during alarm occurs (A.†††).
Display Status
*RUN Power is supplied to the motor.
*BB Power to the motor is OFF.
* P DET Detecting the polarity.
*PT NT Forward or reverse run is prohibited.
*P-OT Running in the forward direction is prohibited.
*N-OT Running in the reverse direction is prohibited.
*HBB In hard-wire base block (safety) state.
∗ B B − P R M / M O N −
U n 0 0 0 = 0 0 0 0 0 0
U n 0 0 2 = 0 0 0 0 0 0
U n 0 0 8 = 0 0 0 0 0 0 0 0 0 0 0
U n 0 0 D = 0 0 0 0 0 0 0 0 0 0 0