Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors - Manual (Page 35)

1.6 Examples of Servo System Configurations
1-15
1
Outline
1.6.2 Connecting to SGDV-†††AE5A SERVOPACK
(1) Using a Three-phase, 200-V Power Supply
∗ Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.7 Regenerative Resistors Connec-
tions.
Regenerative
resistor*
Noise filter
Molded-case
circuit breaker
(MCCB)
Magnetic contactor
I/O signal cable
SGDV- AE5A
SERVOPACK
Power supply
Three-phase 200 VAC
R S T
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is detected.
Used to eliminate
external noise from
the power line
Turns the servo ON
and OFF.
Install a surge
absorber.
Personal
computer
Cable for connecting
personal computer
Digital
operator
When not using the safety function,
use the SERVOPACK with the safety
function’s jumper connector
(JZSP-CVH05-E provided as an
accessory) inserted.
When using the safety function,
insert a connection cable specially
for the safety function.
External device
such as external
LED indicator
Safety function
devices
Cable for connecting
digital operator
Command Option
Module
Main circuit cable
for linear servomotor
Serial converter unit
Cable for connecting
serial converter unit
Linear servomotor
with core
Linear scale
(not included)
Cable for connecting
hall sensor
Cable for connecting
linear scale