Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors - Manual (Page 246)

6.19 EasyFFT (Fn206)
6-35
6
Utility Functions (Fn
)
(2) Related Parameters
The Easy FFT related parameters are listed below. These parameters will be automatically set and the user
need not set them manually.
Parameter Meaning When Enabled Classification
Pn408
n.†††0 Disables 1st notch filter. (Factory setting)
Immediately Setup
n.†††1 Uses 1st notch filter.
n.†0†† Disables 2nd notch filter. (Factory setting)
n.†1†† Uses 2nd notch filter.
Pn409
1st Notch FIlter Frequency
Classification
Setting Range Setting Unit Factory Setting When Enabled
50 to 5000 1 Hz 5000 Immediately Tuning
Pn40C
2nd Notch FIlter Frequency
Classification
Setting Range Setting Unit Factory Setting When Enabled
50 to 5000 1 Hz 5000 Immediately Tuning
Pn456
Sweep Force Reference Amplitude
Classification
Setting Range Setting Unit Factory Setting When Enabled
1 to 800 1% 15 Immediately Tuning
Speed Position Force
Speed Position Force
Speed Position Force