12 write prohibited setting (fn010), 1) utility functions that can be write-protected – Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors User Manual
Page 233
6 Utility Functions (Fn)
6-22
6.12 Write Prohibited Setting (Fn010)
Prohibiting writing prevents writing parameters by mistake.
The following operations can be write-protected using the Fn010 parameter.
• Parameter settings from the digital operator (Pn)
• Utility functions shown in (1) Utility Functions That Can Be Write-protected (Fn)
(1) Utility Functions That Can Be Write-protected
Note 1. {: Possible,
×: Impossible
2. If the write prohibited setting (Fn010) is enabled, “NO-OP” is displayed on the status display of the Digital Oper-
ator if the user attempts to execute the above utility functions. To execute these utility functions, set Fn010 to
write permitted by using the procedure shown in (2) Operating Procedure.
Function No.
Function
Write
Prohibited
Setting
Reference
Section
Fn000
Alarm history display
×
6.2
Fn002
JOG operation
{
6.3
Fn003
Origin search
{
6.4
Fn004
Program JOG operation
{
6.5
Fn005
Initializing parameter settings
{
6.6
Fn006
Clearing alarm history
{
6.7
Fn00C
Offset adjustment of analog monitor output
{
6.8
Fn00D
Gain adjustment of analog monitor output
{
6.9
Fn00E
Automatic offset-signal adjustment of motor current detection signal
{
6.10
Fn00F
Manual offset-signal adjustment of motor current detection signal
{
6.11
Fn010
Write prohibited setting
−
6.12
Fn011
Servomotor model display
×
6.13
Fn012
Software version display
×
6.14
Fn014
Resetting configuration error of option module
{
6.15
Fn01B
Vibration detection level initialization
{
6.16
Fn01E
Display of SERVOPACK and servomotor ID
×
6.17
Fn020
Origin setting
×
4.5.3
Fn030
Software reset
×
6.18
Fn080
Polarity detection
×
4.5.2
Fn200
Tuning-less level setting
{
5.2.2
Fn201
Advanced autotuning
{
5.3.2
Fn202
Advanced autotuning by reference
{
5.4.2
Fn203
One-parameter tuning
{
5.5.2
Fn204
Anti-resonance control adjustment function
{
5.6.2
Fn205
Vibration suppression function
{
5.7.2
Fn206
EasyFFT
{
6.19
Fn207
Online vibration monitor
{
6.20