Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors - Manual (Page 313)

9 Appendix
9-28
Pn553 ×1 Analog Monitor Magnification ( ×2) Immediately
Pn560 40.0% Remained Vibration Detection Width Immediately
Pn561 100% Overshoot Detection Level Immediately
Pn580 10 Reserved Parameter Immediately
Pn581 20 mm/s Zero Speed Level Immediately
Pn582 10 mm/s
Speed Coincidence Signal Output
Width
Immediately
Pn583 10 mm/s Brake Reference Output Speed Level Immediately
Pn584 10000 mm/s Speed Limit Level at Servo ON Immediately
Pn585 50 mm/s Program JOG Movement Speed Immediately
Pn586 0%/maxvel Motor Running Air-cooling Ratio Immediately
Pn587 0000
Polarity Detection for Absolute Scale
Selection
Immediately
Pn600 0 W Regenerative Resistor Capacity Immediately
Pn601 0 Reserved Parameter –
Pn800
to
Pn95F
0 Reserved Parameter –
Parame-
ter
Factory
Setting
Name
When
Enabled