Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors - Manual (Page 317)

Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
Date of
Publication
Rev.
No.
WEB
Rev.
No.
Section Revised Content
September 2014 0 3.6.2 (3) Revision: Description of analog signal input timing
July 2014 0 3.6.3 (2), 4.2.4 (1) Addition: Absolute linear scale by Heidenhain (models: LIC4100-series models)
4.7.5 Addition: Information on types of safety function’s jumper connectors
8.1.1, 8.1.2 Addition: A.861 and A.F50
August 2013 0 Preface, 1.4.2 Revision: Description of Applicable Standards
EN55011/A2 changed to EN55011
Back cover Revision: Address
November 2011 0 Front cover Revision: Description of technical terms, Manuals related to the Σ-V series, Safety precau-
tions
1.2 Addition: SERVOPACKs
1.4.1, 1.7 Deletion: SGDV single-phase 200-V ratings
Chapter 3, 4 Slightly revised
5.1.4 (3), 5.1.4 (5),
6.5 (2), 9.1.2
Revision: Description of related parameters
9.1, 9.3 Addition: Pn081
November 2010 1 Front cover Revision: Format
3.4.1 (2), 3.4.2 (3),
4.7.1, 4.7.1 (5),
4.7.2 (1), 4.7.3 (1)
Revision: Connection example
3.6.2 (4), 4.2.4 (1),
4.5.1, Index
Revision: Company name
Sony Manufacturing Systems → Magnescale Co., Ltd.
4.2.6, 9.1.2 Revision: Setting units of Pn281
5.3.1(1), 5.4.1(1)
Revision: Description of things to do before advanced autotuning and advanced autotuning
by reference
5.8.1 (4), (5) Revision: Applicable control method
5.8.4 Revision: Description of current gain level setting
8.1.2 Revision: Note of A.042
9.1.2 Revision: Description of the second digit (Speed Limit Selection) of Pn408
9.1.2, 9.3 Addition: Pn517 (Reserved Parameter)
Back cover Revision: Address, format
Addition: Original instructions
November 2009 – 0 – First edition
MANUAL NO. SIEP S800000 66A
Published in Japan November 2010 09-11
Date of
publication
Date of original
publication
Revision number
WEB revision number
0 -1
4
3
2
1
0