Energy saver function, Low power mode, Sleep – Kyocera TASKalfa 2552ci User Manual
Page 106: Energy saver function -39, Low power mode -39 sleep -39
2-39
Installing and Setting up the Machine > Energy Saver Function
Energy Saver Function
If a certain period of time elapses after the machine is last used, the machine automatically enters Low Power Mode to
reduce power consumption. If a further period of time elapses without the machine being used, the machine
automatically enters Sleep Mode, which minimizes power consumption.
Low Power Mode
If the machine is not operated for a certain period of time, the energy saver indicator will light up and the screen will
become dark to reduce power consumption. This status is referred to as Low Power Mode.
"Low power." will be displayed on the screen.
The amount of time before entering Low Power Mode: 3 minutes (default setting).
If print data is received during Low Power Mode, the machine automatically wakes up and starts printing. Also when fax
data arrives while the machine is in Low Power Mode, the machine automatically wakes up and starts printing.
To resume, perform one of the following actions.
•
Select any key on the operation panel.
•
Touch the touch panel.
•
Open the optional original cover or the optional document processor.
•
Place originals in the optional document processor.
Recovery time from Low Power Mode is as follows.
•
TASKalfa 2552ci/TASKalfa 3252ci: Within 10 seconds
•
TASKalfa 4052ci/TASKalfa 5052ci/TASKalfa 6052ci: Within 15 seconds
Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly.
Sleep
To enter Sleep, select the [Energy Saver] key. Touch panel and all indicators on the operation panel will go out to save
a maximum amount of power except the Energy Saver indicator. This status is referred to as Sleep.
If print data is received during Sleep, the machine automatically wakes up and starts printing.
Also when fax data arrives while the machine is in Sleep, the machine automatically wakes up and starts printing.
To resume, perform the following actions.
•
Select any key on the operation panel.
•
Touch the touch panel.
•
Place originals in the optional document processor.
Recovery time from Low Power Mode is as follows.
•
TASKalfa 2552ci/TASKalfa 3252ci: Within 16 seconds
•
TASKalfa 4052ci/TASKalfa 5052ci/TASKalfa 6052ci: Within 17 seconds
Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly.
NOTE
If the Low Power Timer is equal to the Sleep Timer, a Sleep mode is preceded.
Energy Saver indicator