Kyocera TASKalfa 2552ci - Manual (Page 336)

6-56
Using Various Functions > Functions
Form Overlay
Prints the original document overlaid with a form or image.
Once you scan and register the form, the form is overlaid onto the original. You can also use a form that is already
registered in the Job Box.
Place the original for the form on top of the other originals. When using the optional document processor, the first page
of the originals should be placed on the top.
Item Value Description
Off
Select Stored
Form Density 10% to 100% Specify the density of the form to be
overlaid.
Select [+] or [-] in "Density".
Finishing
Image Transparent The form is overlaid on the document.
Form on Original Image The form is placed on top of the document.
Original Image on Form The form is placed under the document.
Select Form
*1
*1 Form must be previously registered in Job Box.
Form for Form Overlay (page 5-63)
― Select the form to be overlaid from Job
Box.
Select [Select Form] to display the job
boxes that store documents which can be
used as a form. Select the desired form
from the list and select [OK].
Scan New
Form
*2
*2 Not displayed when printing from the custom box.
Density 10% to 100% Specify the density of the form to be
overlaid.
Select [+] or [-] in "Density".
Finishing
Image Transparent The form is overlaid on the document.
Form on Original Image The form is placed on top of the document.
Original Image on Form The form is placed under the document.
Copy
Layout/Edit Custom
Box
Functions
Original Copy Form
Density:
30%
Density:
100%