Repeat copy, Repeat copy -72 – Kyocera TASKalfa 2552ci User Manual

Page 352

Advertising
background image

6-72

Using Various Functions > Functions

Repeat Copy

Enables additional copies in the desired quantity as necessary after a copy job is completed.

For confidential documents, you can set up a password for the use of Repeat Copy. In such a case, the correct
password must be entered to perform Repeat Copy.

To register a password, select [# Keys] and enter a 4-digit password.

(

Value

: [Off] / [On])

Repeat Copy is not available when the machine is equipped with the optional Data Security Kit.

When the maximum number of Repeat Copy jobs to retain in the document box is set to 0 (zero), this function cannot be
used.

Repeat Copy Job Retention (page 8-39)

You can select Repeat Copy as the default setting.

Repeat Copy (page 8-21)

Giving a file name to a copy job will facilitate identification of the data when copying.

File Name Entry (page 6-71)

Repeat Copy

The Repeat Copy jobs are stored in the Job Box. Refer to Outputting Repeat Copy Jobs to print out the Repeat Copy
jobs.

Outputting Repeat Copy Jobs (page 5-63)

IMPORTANT

• A Repeat Copy job is cleared when the power switch is turned off.

• If you forget the password, Repeat Copy cannot be performed for that document. Make a note of the

password beforehand if necessary.

Copy

Advanced

Setup

Advertising