Kyocera TASKalfa 2552ci - Manual (Page 128)

2-61
Installing and Setting up the Machine > Command Center RX
Command Center RX
If the machine is connected to the network, you can configure various settings using Command Center RX.
This section explains how to access Command Center RX, and how to change security settings and the host name.
Command Center RX User Guide
Settings that the administrator and general users can configure in Command Center RX are as follows.
NOTE
To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
Setting Description
Administ-
rator
General
User
Device
Information The machine's structure can be checked.
Job Status Displays all device information, including print and scan jobs, storing
jobs, scheduled jobs, and job log history.
Document Box Add or delete document boxes, or delete documents within a document
box.
*1
*1 The logged in user may not be able to configure some settings, depending on the permissions of the user.
Address Book Create, edit, or delete addresses and address groups.
*1
Device Settings Configure the advanced settings of the machine. ―
Function
Settings Configure the advanced function settings. ―
Network
Settings Configure the network advanced settings. ―
Security
Settings Configure the security advanced settings. ―
Management
Settings Configure the advanced management settings. ―
NOTE
The optional FAX Kit is required in order to make use of fax functionality.
Here, information on the FAX settings has been omitted.
FAX Operation Guide