Kyocera TASKalfa 2552ci - Manual (Page 262)

5-54
Operation on the Machine > Using Document Boxes
Creating a New Custom Box
1 Display the screen.
1
[Home] key > [Custom Box] > [Add/Edit Box]
2 Register the Custom Box.
1
[Add] > Enter the information for each item > [OK]
The table below lists the items to be set.
NOTE
• If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
The factory default login user name and login password are set as shown below.
• If user login administration is enabled, log in with administrator privileges to perform the following operations. They
cannot be performed with user privileges.
- Creating a box
- Deleting a box of which owner is another user.
Item Description
Box No. Enter the box number by selecting [+], [-] or number keys. The box
number can be from 0001 to 1000. A Custom Box should have a unique
number. If you enter 0000, the smallest number available will be
automatically assigned.
Box Name Enter a box name consisting of up to 32 characters.
Character Entry Method (page 11-10)
Owner
*1
Set the owner of the box. Select the owner from the user list that
appears.
Permission
*2
Select whether to share the box.
Box
Password User access to the box can be restricted by specifying a password to
protect the box. Entering a password is not mandatory. Enter the same
password of up to 16 characters in both [Password] and [Confirm
Password].
This can be set if [Shared] is selected in Permission.
Usage
Restriction The usage for a box can be restricted. To enable a capacity restriction
enter a value for the storage capacity of the Custom Box in megabytes
by selecting [-], [+] or number keys. You can enter a limit between 1 and
30,000 (MB).
Model Name Login User Name Login Password
TASKalfa 2552ci 2500 2500
TASKalfa 3252ci 3200 3200
TASKalfa 4052ci 4000 4000
TASKalfa 5052ci 5000 5000
TASKalfa 6052ci 6000 6000