Kyocera TASKalfa 2552ci - Manual (Page 436)

8-57
Setup and Registration (System Menu) > System Menu
Raw Select whether to receive documents using Raw Port.
*1
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
IPP Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP] to
[On], and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP
Security under Security Settings from the Command Center RX. The default port
number is 631.
*1
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
IPP over SSL To use the IPP protocol, set [IPP] and [SSL] to [On]. The default port number is
443.
*1, *2
Value : Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
HTTP Select whether to communicate using HTTP.
*1
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
HTTPS Select whether to communicate using HTTPS.
*1, *2
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
LDAP Select whether to use LDAP.
Value : Off, On
Item Description