Loading originals, Placing originals on the platen, Loading originals -2 – Kyocera TASKalfa 2552ci User Manual

Page 210: Placing originals on the platen -2, Caution

Advertising
background image

5-2

Operation on the Machine > Loading Originals

Loading Originals

Load the originals on the platen or document processor, depending on the original size, type, volume, and function.

Platen: Place the sheet, book, postcards, and envelopes.

Document Processor: Place the multiple originals. You can also place the two sided originals.

Placing Originals on the Platen

You may place books or magazines on the platen in addition to ordinary sheet originals.

When you place envelopes or cardstock on the platen

NOTE

• A5 is detected as A4-R. Set the paper size to A5 by using the function key on the touch panel.

Original Size (page 6-18)

• For details on Original Orientation, refer to the following:

Original Orientation (page 6-23)

NOTE

For the procedure for feeding envelopes or cardstock, refer to the following:

Loading Envelopes or Cardstock in the Cassettes (page 3-10)

Loading Envelopes or Cardstock in the Multi Purpose Tray (page 5-8)

CAUTION

Do not leave the document processor open as there is a danger of personal injury.

1 Put the scanning side facedown.

2 Align it flush against the original size

indicator plates with the back left corner
as the reference point.

2

1

2

1

1 Put the scanning side facedown.

2 Align it flush against the original

size indicator plates with the back
left corner as the reference point.

Advertising