Dsm scan, Configuring settings before sending, Executing dsm scan – Kyocera TASKalfa 2552ci User Manual

Page 244: Dsm scan -36

Advertising
background image

5-36

Operation on the Machine > DSM Scan

DSM Scan

A scanned document can be automatically saved in any format or sent to any destination by reading a scan process
from Active Directory. This function only supports the computers installed Windows Server 2008 R2 or Windows Server
2012.

When transmitting using wireless LAN, select the interface dedicated to the send function in advance.

Primary Network (Client) (page 8-63)

Configuring Settings before Sending

If you are performing DSM scan, check the items below.

The machine is connected to an Active Directory on the network that the scan process can reference.

"DSM Scan", "LDAP" and "HTTP" are set to [On] in Network.

"SSL" is set to [On] in Network.

[Network Authentication] is set in.

Executing DSM Scan

1

[Home] key > [Send]

2

Place the originals.

Protocol Settings (page 8-55)

Security Settings (page 8-59)

Enabling User Login Administration (page 9-3)

NOTE

If the Active Directory that the scan process can reference is not on the network authentication server, DSM must be
set in Command Center RX.

Command Center RX User Guide

NOTE

Depending on the settings, the address book screen may appear. In this event, select
[Cancel] to display the screen for sending.

Loading Originals (page 5-2)

Advertising