Kyocera TASKalfa 2552ci User Manual
Page 544
10-33
Troubleshooting > Troubleshooting
B
C
Message
Checkpoints
Corrective Actions
Reference
Page
Box is not found.
—
The specified box cannot be
found. Job is canceled. Select
[End].
—
Box limit exceeded.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Is [End] displayed on the
screen?
The specified box is full, and no
further storage is available. Job
is canceled. Select [End]. Try to
perform the job again after
printing or deleting data from the
box.
—
—
Repeat Copy box is full, and no
further repeat copy is available.
Select [Continue] to print
scanned pages. Select [Cancel]
to cancel the job.
—
Message
Checkpoints
Corrective Actions
Reference
Page
Calibrating...
―
The machine is under the
adjustment to maintain its
quality. Please wait.
―
Cannot Banner Print.
―
System stamp is set up.
Banner print cannot be carried
out.
Job is canceled. Select [End].
―
Cannot connect.
―
This appears when the Wi-Fi or
Wi-Fi Direct connection did not
complete. Check the settings,
and check the signal conditions.
―
Cannot connect to
Authentication
Server.
*1
—
Set machine time to match the
server’s time.
—
Check the domain name.
—
Check the host name.
—
Check the connection status
with the server.
—
Cannot connect to
Server.
—
Check the connection status
with the server.
—
Cannot duplex print
on this paper.
Did you select a paper size/type
that cannot be duplex printed?
If the selected paper is not
changed and [Continue] is
selected, duplex is released.
Select the available paper.
Select [Continue] to print.