Kyocera TASKalfa 2552ci - Manual (Page 412)

8-33
Setup and Registration (System Menu) > System Menu
Copy
[System Menu/Counter] key > [Copy]
Configures settings for copying functions.
Item Description
Paper Selection Set the default paper selection.
Value : Auto, Default Paper Source
Auto Image Rotation Action Set whether the image is rotated when the orientation of the document to be printed is
different from the orientation of the paper.
Value
Unrotated Manual Copy: If a paper source or zoom ratio is specified, the image
is not rotated.
Apply All: Rotates all images.
Follow Image Size: The image is rotated if the rotated image fits on the paper.
Auto Paper Selection If [Auto] is selected for Paper Selection, set the paper size selection method when
the zoom changes.
Value
Most Suitable Size: Selects paper size based on the current zoom and the size
of the original.
Same as Original Size: Selects paper that matches the size of the original,
regardless the zoom.
Auto % Priority When a paper source of different size from the original is selected, select whether
automatic zoom (reduce/zoom) is performed.
Value : Off, On
Paper Size for Small
Original Specify the paper size to be used for a case where the original is too small to be
detected in the Auto Paper Selection mode.
Value : Default Paper Source, A4-R, A4, A5-R, A6-R, B5-R, B5, B6-R, Letter-R,
Letter, Statement-R
Preset Limit Restrict the number of copies that can be made at one time.
Value : 1 to 999 copies
Reserve Next Priority Specify whether the default screen appears when a subsequent copy job is reserved
while printing is in progress. To have the default screen appear, select [On].
Value : Off, On
Quick Setup Registration Select the functions to be registered for Quick Setup.
Six keys of the Quick Setup screen are allocated to typical functions but can be
changed as necessary.
Six items in the following options are available.
Value : Paper Selection, Zoom, Staple/Punch
*1
, Density, Duplex, Combine,
Collate/Offset, Original Image, Original Size, Original Orientation,
Color Selection, Continuous Scan, Background Density Adj.
*1 This setting is displayed when the optional Document Finisher is installed. When a punching unit is not installed, this
item name is "Staple".