Kyocera TASKalfa 2552ci - Manual (Page 431)

8-52
Setup and Registration (System Menu) > System Menu
Setup
Item Description
Connection Status Check the wireless LAN status.
Quick Setup If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Available Network Displays access points to which the machine can connect.
WEP Key Index Select the key index of the access point.
Value : 0 to 3
Push Button Method If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN Code Method
(Device) Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
Custom Setup The detailed settings for wireless LAN can be changed.
Network Name (SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
NOTE
Up to 32 characters can be entered.
Network
Authentication Select network authentication type.
Value : Open, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP
Encryption Select encryption method. The setting values vary depending on the Network
Authentication setting.
Network
Authentication
Encryption
Open Disable ―
WEP WEP Key: Up to 26 characters
WEP Key Index: 0 to 3
WPA2/WPA-PSK Data Encryption: AES, Auto
Preshared Key: Up to 64 characters
WPA2-PSK Data Encryption: AES
Preshared Key: Up to 64 characters
WPA2/WPA-EAP Data Encryption: AES, Auto
WPA2-EAP Data Encryption: AES