Kyocera TASKalfa 2552ci User Manual
Page 552
10-41
Troubleshooting > Troubleshooting
R
Message
Checkpoints
Corrective Actions
Reference
Page
Removable memory
error.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Is writing to a removable
memory prohibited?
An error occurred in the
removable memory. The job
stopped. Select [End].
The possible error codes and
their descriptions are as follows.
01: Connect a removable
memory that can be written to.
―
―
An error occurred in the
removable memory. The job
stopped. Select [End].
The possible error codes and
their descriptions are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, the removable
memory is not compatible with
the machine. Use the removable
memory formatted by this
machine. If the removable
memory cannot be formatted, it
is damaged. Connect a
compatible removable memory.
Removable Memory is
full.
―
The job is canceled. Select
[End].
Insufficient free space in the
removable memory. Delete
unneeded files.
―
Remove originals in
the document
processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals
and press [Continue].
—
Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the
job.
—
Replace the waste
toner box.
Is the waste toner box full?
Replace the waste toner box.
Running security
function...
—
Running security function.
Please wait.
—