Kyocera TASKalfa 2552ci - Manual (Page 433)

8-54
Setup and Registration (System Menu) > System Menu
Restart Network
Item Description
IPv6 Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/
IP] is [On].
IPv6 Select whether to use IPv6.
Value : Off, On
NOTE
Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the
network.
RA (Stateless) Select whether to use RA (Stateless).
Value : Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the
network.
Manual Setting Manually specify the IP address, prefix length, and gateway address of TCP/IP
(IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting
of four-digit hexadecimal digits. The groups are separated
by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of
four-digit hexadecimal digits. The groups are separated by
colon (:).
NOTE
This function is displayed when [IPv6] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
DHCP Select whether to use the DHCP (IPv6) server.
Value : Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the
network.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Restart Network Restarts the network.