Kyocera TASKalfa 2552ci User Manual
Page 421
8-42
Setup and Registration (System Menu) > System Menu
Job Name
Set whether the job name set in the printer driver is displayed.
Value
: Off, On
NOTE
When selecting [On], select the job name to be displayed from [Job Name], [Job No.
& Job Name], or [Job Name & Job No.].
User Name
Set whether the user name set in the printer driver is displayed.
Value
: Off, On
Paper Feed Mode
While printing from the computer, select how to feed paper when the paper source
and type are specified.
Value
Auto: Search the paper source that matches the selected paper size and type.
Fixed: Print on paper loaded in the specified paper source.
MP Tray Priority
If paper is set in the MP Tray then it is possible for priority to be given to that MP tray
in the paper feed.
Value
Off: The printer driver settings are followed.
Auto Feed: If Auto is selected in the printer driver and there is paper in the MP
tray then the paper feed will be from the MP tray.
Always: If there is paper in the MP tray then the paper feed will be from the MP
tray regardless of what is set in the printer driver.
Auto Cassette Change
Select the following actions when the paper runs out in the paper source while
printing.
Value
: Off, On
NOTE
•
When selecting [Off], the machine displays "Add the following paper in cassette
#." (# is a cassette number) or "Add the following paper in the multi purpose tray.",
and stops printing.
•
Load the paper according to the paper source displayed to resume printing.
•
To print from the other paper cassette, select [Paper Selection]. Select the
desired paper source.
•
When selecting [On], the machine continues printing automatically when the other
cassette contains the same paper as the currently-used cassette.
Wide A4
Turn this to on to increase the maximum number of characters that can be printed in a
line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at
10 pitch). This setting is only effective in PCL6 emulation.
Value
: Off, On
Resolution
Set the resolution used for printing.
Value
: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the operation
panel settings.
KIR
Select the default KIR (smoothing) setting.
Value
: Off, On
Item
Description